Pipeline Configuration and Usage Tutorial

• Configure the pipeline config file and input files to run files against it
• For reuse, download the config file and re-upload it when needed, or place it in /pipeline/defaultWebUIConfigs/ to auto-load in the web UI for all users

Steps to Configure and Use Your Pipeline

1. Access Configuration

   • Upon entering the screen, click on the Configure button.

2. Enter Pipeline Name

   • Provide a name for your pipeline in the designated field.

3. Select Operations

   • Choose the operations for your pipeline (e.g., Split Pages), then click Add Operation.

4. Configure Operation Settings

   • Input the necessary settings for each added operation. Settings are highlighted in yellow if customization is needed.

5. Add More Operations

   • You can add and adjust the order of multiple operations. Ensure each operation's settings are customized.

6. Save Settings

   • Click Save Operation Settings after customizing settings for each operation.

7. Validate Pipeline

   • Use the Validation button to check your pipeline. A green indicator signifies correct setup; a pop-out error indicates issues.

8. Download Pipeline Configuration

   • To use the configuration for folder scanning (or save it for future use and reupload it), you can also download a JSON file in this menu. You can also pre-load this for future use by placing it in /pipeline/defaultWebUIConfigs/. It will then appear in the dropdown menu for all users to use.

9. Submit Files for Processing

   • If your pipeline is correctly set up close the configure menu, input the files and hit Submit.

10. Note on Web UI Limitations

    • The current web UI version does not support operations that require multiple different types of inputs, such as adding a separate image to a PDF.

Current Limitations

• Cannot have more than one of the same operation
• Cannot input additional files via UI
• All files and operations run in serial mode